|
|
 |
.
Door Handles/Pulls
|
|
|
Black
Poly Door Handle, 5 1/2" L |
 |
This door handle
can be installed just about anywhere you
need to open a door more conveniently. It is
not designed to support weight. 1 1/8" hand
clearance. Screw centers are 4 3/4" apart.
*Install with
two # 10 screws, sold on the
Fastener page. |
|
Black Poly Door Handle, 5 1/2" L |
|
|
|
|
Black
Poly Door Handle, 9 1/2" L |
 |
This door handle
can be installed just about anywhere you
need to open a door more conveniently. It is
not designed to support weight, but it can
be used for heavy doors. 1 1/8" hand
clearance. Screw centers are 7 15/16" apart.
*Install with
two #14 screws, sold on the
Fastener page. |
|
Black Poly Door Handle, 9 1/2" L |
|
|
|
|
Steel
Grab Handle, 13 1/4" L
|
 |
This
1/2" diameter polished steel "grab" handle
is designed to support some weight, such as
when you need to help yourself up on a step.
Hand clearance is 1 1/2". Screw centers are
1 inch apart on each end, The two inside
screw centers are 10 1/8" apart & the two
outside screw centers are 11 1/8" apart.
*Install with four #14 screws,
sold on the Fastener page. |
|
Steel Grab Handle, 13 1/4" L |
|
|
|
|
Solid
Steel Chrome
Grab Handle, 8 1/4" L
|
Shown
with gasket installed below.
 |
This heavy, beautiful
handle is an upgrade to any trailer.
Constructed of 1/2"
diameter solid die cast steel with a bright
polished chrome finish. This "grab" handle
is designed to support some weight, such as
when you need to help yourself up on a step.
Hand clearance is 1 1/4"T x 4 1/2"W. Screw centers are
1 inch apart on each end, and 7" vertically.
Gasket pair available below. *Install
with four Sheet Metal Screws, #14 X 1 1/2 FH",
sold on the Fastener
page.
Rubber Gasket Pair |
|
Solid Steel
Chrome Grab Handle 8 1/4" L |
|
|
|
Rubber
Gasket Pair for
Chrome Grab Handle 8 1/4" L |
|
|
|
|
Formed Steel Chrome
Grab Handle, 8 1/4" L
|
Shown with
gasket installed below.
 |
This beautiful
handle is an upgrade to any trailer.
Constructed of formed, rolled steel with a bright
polished chrome finish. This "grab" handle
is very sturdy & designed to support some weight, such as
when you need to help yourself up on a step.
Hand clearance is 1" T x 4 1/2"W. Screw centers are
1 inch apart on each end, and 7" vertically.
Gasket pair available below. *Install
with four Sheet Metal Screws, #14 X 1 1/2 FH",
sold on the Fastener page.
Rubber Gasket Pair |
|
Formed Steel
Chrome Grab Handle 8 1/4" L |
|
|
|
Gasket Pair for
Chrome Grab Handle 8 1/4" L |
|
|
|
|
|
