|
|
 |
Miscellaneous
Trailer Parts
|
|
|
Snap-On
Chrome Lug Cover, 6 Lug |
 |
Snap-On Chrome Hub Cover, 6 on 5 1/2" Bolt
Pattern
These lug covers are good
looking & useful, but they frequently fall
off! Please pry off one of the remaining
ones on the wheel & compare the number
stamped on the inside for a sure fit.
Trail Pals tip:
Order this product if the
number stamped inside is QT655C. |
|
Snap-On Chrome Lug Cover, 6 Lug, Bolt
Pattern 6 on 5 1/2 |
|
|
|
|
Snap-On
Chrome Lug Cover, 8 Lug w/ 13/16" Lug Nuts |
 |
Snap-On Chrome Hug Cover, 8 on 6 1/2 Bolt
Pattern w/ 13/ 16 LUG
NUTS
These lug covers are good
looking & useful, but they frequently fall
off! Please pry off one of the remaining
ones on the wheel & compare the number
stamped on the inside for a sure fit.
Trail Pals tip:
Order this product if the
number stamped inside is QT765C. |
|
Snap-On Chrome Lug Cover, 8 Lug for 13/16
Lug Nuts |
|
|
|
|
Snap-On
Chrome Lug Cover, 8 Lug w/ 7/8" Lug Nuts |
|
Pic Here |
Snap-On Chrome Lug Covers, 8 on 6 1/2 Bolt
Pattern w/ 7/8" LUG
NUTS
These lug covers are good
looking & useful, but they frequently fall
off! Please pry off one of the remaining
ones on the wheel & compare the number
stamped on the inside for a sure fit.
Trail Pals tip:
Order this product if the
number stamped inside is QT865C. |
|
Snap-On Chrome Lug Cover, 8 Lug for 7/8" Lug
Nuts |
|
|
|
|
Toggle
Switch Cup, Aluminum, w/ One Opening |
|
Pic Here |
Toggle Switch Cup w/ One opening
This switch cup fits in a one
inch deep, 2 1/8" - 2 1/4" diameter
hole. The outer frame is 3 3/8" diameter,
and the 3 mounting holes are 2 3/8" on
center from each other. Mount with rivets or
four #8 X 3/4" screws, sold on the
Fastener page.
We do not sell the toggle
switches. |
|
Toggle Switch Cup w/ One opening |
|
|
|
|
Toggle
Switch Cup, HD Plastic, w/ Four
Punch-outs |
|
Pic Here |
Toggle Switch Cup w/ Four Punch-outs
This heavy-duty black
plastic switch cup fits in a one inch
deep, 2" X 3 1/4" OVAL-shaped
hole. The outer frame is 3 1/4" Wide X 4
1/4" Long. The mounting holes are 2
3/4" apart on center for the width, and 4"
apart on center for the length. Mount with
rivets or four #8 X 3/4" screws, sold on the
Fastener page.
We do not sell the toggle
switches. |
|
Toggle
Switch Cup w/ Four Punch-outs |
|
|
|
|
Stake
Pockets |
 |
Stake Pockets (Weld on)
Interior or exterior applications. Will
hold a 1 3/4"X3" piece of lumber, steel
or aluminum. Could be used to secure a
saddle tree inside a tack room or ???.
Unpainted steel.
Stake Pockets (Bolt
on) Interior or exterior applications.
Not the same dimensions as the weld-on
version! Will hold a 1 1/2"X
3" piece of lumber,
steel or aluminum. Fastens with 2 carriage
bolts on each side. Could be used to secure a saddle
tree inside a tack room or ???. Unpainted
steel.
Bolt on version:
Each side has a side bracket area that bolts
on, 2 1/2" T X 1 7/8" W, for a total width
of 6 7/8" wide. 4 bolts total. Bolt centers
are 5 3/4"apart, horizontally, and 1/2" & 2"
apart, vertically measured from the bottom
of each bracket
|
|
Stake Pocket, Weld-On |
|
|
|
Stake Pocket, Bolt-On |
|
|
|
|
Trailer
Divider Pin, 7" Aluminum |
 |
LOW TECH. This is a replacement
pin for trailer dividers that use the pin and
bushing method of closure. These can be used in a
steel trailer with no problem. 1/2" diameter,
fits in a 1/2 inch bushing. |
|
Trailer Divider Pin, 7" aluminum |
|
|
|
|
|
