|
|
 |
Horse Trailer
Pads-
Wall,
Round or Wrap Kits

|
|
|
Horse Trailer
WALL PADS |
Trail Pals
tip:
These pads are
constructed of a soft, but strong vinyl, sewn
over 1 1/2" foam onto a rigid cardboard
backing. This creates a 1" flat border area. We have had them in our trailer
(stored outdoors in a rainy environment) for
three years with no problem.
Horse
Trailer Pad fastener option:
Black Nylon Retainer Clip
(code: HTPRC)
These are also known as "push pins". They
work with 1" double-wall aluminum trailers &
dividers, although they are designed for
just a one-time use. The nylon
threads are flexible, and they catch the
trailer surface & hold the pad tight. Using
a drill with a 3/16" bit, drill a hole
through the flat pad border area & trailer wall. Push the pin
in with your fingers. You can use less clips
than with a screw application, drill less
holes, and it looks neater. Choose the 1"
black retainer clips for the pads we sell.
*These are also the common applicator for
homemade or commercial "upgrade" trailer
pads
that have no border, and here they are applied
directly through the foam area. For trailer pads
made with no border,
choose the 1 1/2" length black retainer clip.
HOW MANY DO YOU NEED?
-
4 Clips for each 12" pad
- 6 clips for each 24" pad
- 8 clips for each 40" pad
- 10 clips for each 60" pad
|
Horse
Trailer Wall Pads
Made in the USA
The standard
color is black, with a grain design on
it that resembles leather.
Pad
your slant-load and straight-load trailer dividers and
walls.
Fasten with appropriate screws and
washers along the 1" border, where there is no padding.
Single
rectangular
trailer pads in any combination are priced as follows:
|
HTP60B |
9"W X
60"L |
$
23.00 each |
|
HTP40B |
9"W X
40"L |
$17.00 each |
|
HTP24B |
9"W X
24"L |
$
12.00 each |
|
HTP12B |
9"W X
12"L |
$
8.00 each |
60" pads
are for side walls with no access doors
or slant-load dividers.
*They have an
extra charge for an extra-long box.
40" pads
are for trailer walls with escape doors or
slant-load dividers.
24" pads
are for breast or butt pads.
12" pads
are for escape doors.
We sell #8
1/2" or 3/4" long steel/zinc
screws & washers to mount
these pads to any wood, steel or
aluminum trailer surface.
HOW
MANY Do You Need? Suggestion:
-
6
screws & washers for a 12" pad
- 8
screws & washers for a 24" pad
- 10
screws & washers for a 40" pad
- 14
screws and washers for a 60" pad
For steel or wood surfaces, order
#8 - 1/2" or 3/4"
wood screws,
self- drilling screws or washers on the
Fastener page.

Wood Screw
Sheet Metal Screw #8
Washer
For installing pads on aluminum
surfaces, order coated TEK screws from
the Fastener page.
You won't need washers.

|
|
Horse Trailer Wall Pad, 9" x 12" Black |
|
|
|
Horse Trailer Wall Pad, 9" x 24" Black |
|
|
|
Horse Trailer Wall Pad, 9" x 40" Black |
|
|
|
Horse Trailer Wall Pad, 9" x 60" Black (+ EXTRA UPS CHARGE For LONG BOX) |
|
|
|
*** If
ordering multiple 60"Wall Pads, click "Add to Cart" for each pad |
|
Horse Trailer Wall Pad Retainer Clip, 1" |
|
|
|
Horse Trailer Wall Pad Retainer Clip, 1 1/2" |
|
|
|
|

|
Horse
Trailer Breast/Butt Pads, Round
with Pipe,
size Medium
(If you
need a medium-sized round pad without a pipe
glued inside, scroll down to the Self-Wrap Kit) |
.JPG)
Made in the USA
by
Garden
Horse
Upholstery
These
pads are designed to cushion & protect your
horse. They are very durable and will last
for years--
just wipe them clean.
Measure Carefully!
NO RETURNS ON
CUSTOM-SEWN PADS
|
Round Breast or Butt Bar Pads constructed
with PVC pipe
inside (designed for butt bars that
measure no more than 1 1/2" across
on the inside). This replacement round breast or butt pad
matches our other trailer pads, and are
designed to carefully be slipped over a round steel or
aluminum pipe or butt bar that measures no more than
1 1/2 inches across on the outside
(OD) of
the pipe. It is constructed of one layer
of 1" foam glued to a PVC pipe, covered with
black vinyl. They are hand-gathered at the
ends, and may be tightened after
installation.
Measure
carefully---the pipe cannot
be removed.
Total Diameter::
approximately 3-4"
Choose 24", 26", 28" , 30" or 32" long. In
BLACK ONLY.
*These
are shipped by Parcel Post directly from
Garden Horse
Upholstery in Oregon, so expect a 10-14 day
delivery time. You can request Priority Mail
(5-7 days), with added shipping cost. |
|
Horse Trailer Pad, Round 4" X 24" w/pipe
BLACK |
|
|
|
Horse Trailer Pad, Round 4" X 24" w/pipe
GREY |
|
|
|
Horse Trailer Pad, Round 4" X 26" w/pipe
BLACK |
|
|
|
Horse Trailer Pad, Round 4" X 26" w/pipe
GREY |
|
|
|
Horse Trailer Pad, Round 4" X 28" w/pipe
BLACK |
|
|
|
Horse Trailer Pad, Round 4" X 28" w/pipe
GREY |
|
|
|
Horse Trailer Pad, Round 4" X 30" w/pipe
BLACK |
|
|
|
Horse Trailer Pad, Round 4" X 30" w/pipe
GREY |
|
|
|
Horse Trailer Pad, Round 4" X 32" w/pipe
BLACK |
|
|
|
Horse Trailer Pad, Round 4" X 32" w/pipe
GREY |
|
|
|

|
Horse
Trailer Breast/Butt Pads, Round
with Pipe,
size Large |
.JPG)
Made in the USA
by:
Garden
Horse
Upholstery
These
pads are designed to cushion & protect your
horse. They are very durable and will last
for years---
just wipe them clean.
Measure Carefully!
NO RETURNS ON
CUSTOM-SEWN PADS
|
Round Breast or Butt Bar Pads constructed
with pipe
inside (designed for butt bars that
measure no more than 1 1/2" across
on the inside). This replacement round breast or butt pad
matches our other trailer pads, and are
designed to carefully be slipped over a round steel or
aluminum pipe or butt bar that measures no more than
1 1/2 inches across on the outside
(OD) of the pipe. It is constructed of
two layers of 1" thick foam foam glued to a PVC pipe, covered
with black vinyl. They are hand-gathered at
the ends, and may be tightened after
installation.
Measure
carefully---the pipe cannot
be removed.
Total Diameter::
approximately 5 1/2"-6"
Choose 24", 26", 28" , 30" or 32" long.
Call for longer sizes. In BLACK only.
*These
are shipped by Parcel Post directly from
Garden Horse
Upholstery in Oregon, so expect a 10-14 day
delivery time. You can request Priority Mail
(5-7 days), with added shipping cost. |
|
Horse Trailer Pad, Round, 6" X 24" w/ pipe
BLACK |
|
|
|
Horse Trailer Pad, Round, 6" X 24" w/
pipe GREY |
|
|
|
Horse Trailer Pad, Round, 6" X 26" w/ pipe
BLACK |
|
|
|
Horse Trailer Pad, Round, 6" X 26" w/
pipe GREY |
|
|
|
Horse Trailer Pad, Round, 6" X 28" w/ pipe
BLACK |
|
|
|
Horse Trailer Pad, Round, 6" X 28" w/ pipe
GREY |
|
|
|
Horse Trailer Pad, Round, 6" X 30" w/ pipe
BLACK |
|
|
|
Horse Trailer Pad, Round, 6" X 30" w/
pipe GREY |
|
|
|
Horse Trailer Pad, Round, 6" X 32" w/
pipe BLACK |
|
|
|
Horse Trailer Pad, Round, 6" X 32" w/
pipe GREY |
|
|
|

|
Horse
Trailer Breast/Butt Pads, Round
without Pipe inside,
size Large |
.JPG)
Made in the USA
by
Garden
Horse
Upholstery
These
pads are designed to cushion & protect your
horse. They are very durable and will last
for years---
just wipe them clean.
Measure Carefully!
NO RETURNS ON
CUSTOM-SEWN PADS
|
Round Breast or Butt Bar Pads constructed
without PVC pipe
inside (designed for larger butt bars that are 1
5/8"
to 2 1/4", inside diameter). This replacement round breast or butt pad
matches our other trailer pads, and are
designed to carefully be slipped over a round steel or
aluminum pipe or butt bar up to 2 1/4 inches
in diameter. It is constructed of
two layers of 1" foam, covered with black vinyl.
They are hand-gathered at the ends, and may
be tightened after installation.
Total Diameter::
approximately 5 1/2"-6"
Choose 24", 26", 28" , 30" or 32" long.
Call for longer sizes. In BLACK only.
*Call us if you have a
larger diameter pipe or bar (it will cost
a little more, due to use of more materials).
*These
are shipped by Parcel Post directly from the
Garden Horse
Upholstery in Oregon, so expect a 10-14 day
delivery time. You can request Priority Mail
(5-7 days), with added shipping cost. |
|
Horse Trailer Pad, Round 6" X 24" w/o
inner pipe BLACK |
|
|
|
Horse Trailer Pad, Round 6" X 24" w/o
inner pipe GREY |
|
|
|
Horse Trailer Pad, Round 6" X 26" w/o
inner pipe BLACK |
|
|
|
Horse Trailer Pad, Round 6" X 26" w/o
inner pipe GREY |
|
|
|
Horse Trailer Pad, Round 6" X 28" w/o
inner pipe BLACK |
|
|
|
Horse Trailer Pad, Round 6" X 28" w/o
inner pipe GREY |
|
|
|
Horse Trailer Pad, Round 6" X 30" w/o
inner pipe BLACK |
|
|
|
Horse Trailer Pad, Round 6" X 30" w/o
inner pipe GREY |
|
|
|
Horse Trailer Pad, Round 6" X 32" w/o
inner pipe BLACK |
|
|
|
Horse Trailer Pad, Round 6" X 32" w/o
inner pipe GREY |
|
|
|

|
NEW!
Horse
Trailer Breast or Butt Pad,
SELF-WRAP Kit |
|
We have a complete
selection of pre-made Breast & Butt Pads for
round bars, but this is the product that
will fit just about every other shape of
bar. These will match our
other breast, butt or wall pads perfectly.

Made in the USA
by
Garden
Horse
Upholstery
These
professionally-made pads are designed to cushion & protect your
horse. They are very durable and will last
for years---just wipe them clean.

Example of how finished end
will look when gathered around bar
Measure Carefully!
NO RETURNS ON
CUSTOM-SEWN PADS |
This is a custom-sewn product, designed for
rectangle-shaped breast bars OR round
bars that have welded attachments which
prevent a finished round pad from being
slipped on from the side. The maximum
perimeter/ circumference bar measurement
allowed for these pads is 8" (diameter
of the bar would be 2
1/2").
Black only.
*Custom quotes are
available for larger rectangular or round
bars, such as breeding stocks, etc.
Flat-rate shipping does not apply to unusual
custom items--actual shipping applies. Call
(503) 826-8552 with all questions & quotes. ***********************************************
The SELF-WRAP PAD KIT consists of:
1 inch thick
high-density foam pad
cut to fit around the perimeter of your bar.
You will fasten it on with duct tape or zip
ties (not included & your choice).
A vinyl cover that
will be custom sewn to the
circumference measurement
that you provide (8" circumference is the
largest without extra charge ) and the length measurement
you choose from the choices below. This cover will have 1 inch of
covering that overlaps on the ends, with nylon strings
installed that can be
hand-gathered and tied to hide the edges of
the foam. It keeps the pad cleaner & looks
more professional.
Measure
carefully--the Velcro fastener strip
overlaps 2", so there is only a little room for
adjustment at the bottom.
Choose 24", 26", 28" , 30" or 32" long.
Then measure around the bar you want to
cover.
Please email us with your circumference measurement at
info@trailpals.com . We will
match your email address to your order &
send you the correct amount of foam & a
professionally-sewn cover to match.
SHIPPING: These
are shipped by Parcel Post directly from
Garden Horse
Upholstery in Oregon, so expect a 14 day
delivery time. You can request Priority Mail
(5-7 days), with added shipping cost. |
|
Horse Trailer Pad, Wrap-Kit, 24"
long BLACK |
|
|
|
Horse Trailer Pad, Wrap-Kit, 24" Long
GREY |
|
|
|
Horse Trailer Pad, Wrap-Kit, 26" Long
BLACK |
|
|
|
Horse Trailer Pad, Wrap-Kit, 26" GREY |
|
|
|
Horse Trailer Pad, Wrap-Kit, 28" Long
BLACK |
|
|
|
Horse Trailer Pad, Wrap-Kit, 28" Long
GREY |
|
|
|
Horse Trailer Pad, Wrap-Kit, 30" Long
BLACK |
|
|
|
Horse Trailer Pad, Wrap-Kit, 30" Long
GREY |
|
|
|
Horse Trailer Pad, Wrap-Kit, 32" Long
BLACK |
|
|
|
Horse Trailer Pad, Wrap-Kit, 32" Long
GREY
|
|
|
|

|
|