|
|
 |
Windows &
Feed Doors

|
|
|
RECTANGLE
Acrylic Window
Panels |

Example: UVEX rectangular
window panel with the aluminum lipped trim applied. |
UVEX acrylic rectangular
panels are ORDERED LARGER THAN THE WINDOW
OPENING &
fastened onto the trailer with glue, screws
or rivets. The edges
are covered with a piece of aluminum lipped trim (sold
below), to form a window. Shatter-resistant,
the panels are 1/8" thick. The color has a
"smoked glass" tint that absorbs 65-70% of
all UV rays. It can be bent around a gentle
curve. *Shown here with the frame
trim on, but sold without the frame.
Aluminum lipped trim for the frame is sold
below. *See some odd
sizes & one-of-a-kind rectangular Plexiglas
windows for sale on the
SALE page. |
|
UVEX Window, 8" X 15", Rectangle |
|
|
|
UVEX Window, 8" X 18", Rectangle |
|
|
|
UVEX Window, 9" X 20", Rectangle, Rectangle |
|
|
|

|
Aluminum
Lipped Trim |
 |
This decorative aluminum trim is
traditionally used to trim around Plexiglas
acrylic windows. LOOKS BEST WHEN
CORNERS ARE MITERED. Also used to cover the
seams on trailers where an upper curve is
involved, such as between the roof & sides.
It can be fastened
with glue & rivets. It is sold in 12
foot sections, but is cut in half before
shipping. You will receive two 6 ft. pieces.
choose 1" or 1 1/4" wide. |
|
Aluminum Lipped Trim 1" OR 1 1/4" x
12' |
|
|
|
|
|

|
OVAL Acrylic Window
Panels |

Example: UVEX
acrylic oval
window panel installed with the rubber
window gasket.
|
UVEX acrylic oval
panels are shatter-resistant & the
panels are 1/8" thick. The color has a
"smoked glass" tint that absorbs 65-70% of
all UV rays. It can be bent around a gentle
curve.
OVAL UVEX panels are usually
installed with a continuous rubber window gasket (as
shown), sold below by the foot.
*8"
X 18" window:
(approx. 52")--order 5
ft. of gasket for one window, 9' for
two windows.
*9"
X 20" window:
(approx. 54")-- order 5
ft. of gasket for one window, 10ft. for two
windows. |
|
UVEX Acrylic Window, 8" X 18", Oval |
|
|
|
UVEX Acrylic Window, 9" X 20", Oval |
|
|
|

|
Rubber
Window Gasket - sold by the foot |
 |
This continuous rubber seal & gasket is
made to install an
OVAL shaped 1/8" thick
Plexiglas window
into a 16-gauge
steel trailer wall. Please order a little
longer length than you think you need, because they
are hard to measure & it may shrink after
being stretched during installation.
*This
product does not come with instructions for
installation. |
|
Rubber Window Gasket, for 1/8" x 16 Gauge---sold
by the foot |
|
|
|

|
Slider
Windows |
 |
Also known as 90 degree radius windows.
.These windows come standard with
tempered safety glass, black frames and screens. They have a latch
for locking and simple pull handles, and are
designed to fit either the left or right
hand side. We have 7 popular
sizes to fit your applications. Mount
with screws or rivets (not included).
Clamp rings for these
windows are sold below.
|
|
Slider Window 12" Tall x 18" Wide |
|
|
|
|
Slider Window 12" Tall x 24" Wide |
|
|
|
|
|
Slider Window 12" Tall x 36" Wide |
|
|
|
|
|
Slider Window 12" Tall x 42" Wide |
|
|
|
|
Slider Window 12" Tall x 48" Wide |
|
|
|
Slider Window 15" Tall x 24" Wide |
|
|
|
Slider Window 18" Tall x 42" Wide |
|
|
|

|
Clamp Rings for the Slider Windows sold
above |
 |
Ho
Most "sliding" trailer windows are
attached by rivets or screws. Clamp rings are used for a
more professional-looking installation, but are not
absolutely necessary. They are offered in two wall
thicknesses: 3/4" & 1 1/4", for each size window.
when ordering a clamp ring for a slider
window, the numbers on the SKU are the height of
the window X the length of the window X
the thickness of the wall.
*Some of our customers have reported that
the shape of the clamp rings sometimes isn't exactly the
shape for the hole they cut for the window in the side
of the trailer, but almost all of them have been able to
make the clamp ring work.
Use #8 X 1/2" screws, available on
the Fastner page |
|
Slider Window Clamp Ring 12x18, for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 12x18,
for 3/4" wall thickness
|
|
Slider Window Clamp Ring 12x24,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 12x24,
for 3/4" wall thickness
|
|
Slider Window Clamp Ring 12x36,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 12x36,
for 3/4" wall thickness
|
|
Slider Window Clamp Ring 12x42,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 12x42,
for 3/4" wall thickness
|
|
Slider Window Clamp Ring 12x48,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 12x48,
for 3/4" wall thickness
|
|
Slider Window Clamp Ring 15x24,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring
15x24, for 3/4" wall thickness
|
|
Slider Window Clamp Ring 18x42,
for 1 1/4" wall thickness
|
|
Slider Window Clamp Ring 18x42,
for 3/4" wall thickness
|
|

|
Drop-Down
Feed Doors / Windows |
The windows installed on this
Circle J trailer are the exact model of window that we are offering for sale, in
three sizes. Pictured are the 20" X 24"
size in 3 different positions, shown from
the interior & exterior.
++++++++++++++++++++++++++++++++++++
 |
Drop-Down Windows serve as
"feed-door" and window combined! Top-latch
handle opens from outside, hinged at bottom. Slider-style lower
safety-glass panel allows
screened ventilation with the window in the
upright-closed position. These windows
feature an aluminum frame with bars (called a cage or
face guard) on
the inside, that opens & close
separately, but can remain up when the
window portion is "dropped down", for
optimum ventilation and the horse's
protection. * Heavy all-aluminum frame
* Flush mount latch
* Automotive rubber seal around window area
* Drop-down protective aluminum cage
*All windows are black trim with smoked
glass *window
purchase includes
inner aluminum trim piece (not shown)
**These
windows may not match the style of
your trailer's existing windows, due to
the fact that some window manufacturers have
recently gone out of business! Please look
carefully to be sure the SHAPE of the window
is a match. |
|
Drop Down Feed Window, 20" Tall x 24" Wide |
|
|
|
Drop Down Feed Window, 20" Tall x 30" Wide |
|
|
|
Drop Down Feed Window, 24" Tall x 30" Wide |
|
|
|
|
|
|

|
|